5000kg Head & tail stock positioner
Control System & Package
Head & Tail stock positioners generally handle the rotation of long work pieces around a horizontal centreline. This type is very special,it can lift by hydraulic,can rotate and tilt 360°,it make work convenient for welding.
Here Below is 5T Head & Tail Stock Welding Positioner Specification:
|Load capacity||5000kg maximum|
|Tilting speed||0.14 rpm|
|Tilting power||3 kw|
|Rotation speed||0.05-0.5 rpm|
|Rotation power||3 kw|
|Control way||Remote hand control + Foot pedal|
|Input Voltage||110V ~ 575V Single/3 Phase 50/60Hz|
Welding Positioner Description:
1.Head and Tail stock welding positioners work through the two ends of the long work piece clamping,and can adjust the height via hydraulic system to achieve the ideal position.
2.The clamps can be designed according to your work piece.
3. Typically a Head & Tailstock Welding Positioner is used for long rectangular shapes that must be supported from both ends.
4. It can be adopted by electric welding Rotary achieve the desired location.
5. Head Stock welding positioner can overturn and tilt the work piece 360°.
6. Voltage is 220V,380V,415V,600V, 50 / 60Hz , 3Ph. Or as your required.
7.100% new from manufacture-Wuxi Success Machinery Equipment CO.,LTD.
Our Suggestions On Head & Tail Welding Positioner :
1. If your work piece is pipe, please advise us the pipe diameter for the welding chuck model.
2. If your work piece is too long or high , please advise us in advance,then we can adjust the positioner table center height .
3. If you want the clamps for your special work piece , then please advise us the details drawings,we also can produce for you.
Head & Tail Stock Welding Manipulator Feature:
1. We have 3 jaws or 4 jaws chucks for chosen.
2. Special clamps are available,but we have to design according to your work piece detail drawings.
3. Bolt fixed the work piece on the turning table then weld with the automatic welding guns.
4. It can joint welding column and boom manipulator working.
Hydraulic Head And Tail Stock Positioner Spare Parts Brand:
1. Rotary welding positioner Inverter is Danfoss / Yaskawa.
2. Head stock and Tail stock positioner Electric system is Schneider.
3. Welding rotary positioner Motor is Invertek.
4.CE certificates to European market and America market.
More Questions Customers May Concerned On Our Welding Machine:
Q : What about the transportion?
A : 1. Fully packaged in wooden case to anti damage during the transportational process .
2. Usually we take seaway ,cause its more convenient and cheaper for big machine.
3. Door to door delivery service is also available.
Q : What is your warranty and after sale service ?
A : 1. All our equipments with One Year Warranty time , fully test at our work shop before delivery.
2. If you have any questions on the installation , you will get our engineers respond within 24 hours.
1. If order one / two sets welding positioner ,then we will package with wooden case for LCL shipping.
2. If the order quantity enough for one whole containers,we will package into containers directly.
1. We have exported our head & tail stock positioners to more than 30 countries in the world. European & America stock is available.
2. Here below some welding pisitoner working pictures are all from our clients feedback from their work site.
Italy 10T Welding Table With Positioner. Saudi Arabia 15T Welding Positioner 15T Welding Positioner Work With Chuck